POLYTEN FAST SET Professional PVA Adhesive Glue

This offer is for one 125ml pot of Polyten High Strength Fast Set Adhesive with dispenser nozzle. This glue is the highest quality PVA adhesive which has a wide range of professional and art and craft uses. Polyten is a Thick glue which is simply the best for those harder to stick items. It is also quick drying so if you are on batch production, you can carry on working instead of waiting for things to dry.

POLYTEN fast grab wood glue:

Bonds in ten minutes for fast assembly wood work. It is easy to apply straight from the nozzle. Forms a water resistant, strong bond.

ideal for
wood and joinery • assembly of doors • window frames • garden furniture

unique qualities
bonds in 10 minutes • water resistant • strong bond • easy to apply

Introduction.

Polyten/ Extrarez is a single part, fast setting, cross-linking PVA adhesive.

Uses

Polyten/ Extrarez is a wood adhesive designed for high-speed assembly work, doweling, finger jointing, door assembly, veneering with wood or high-pressure laminates. It can be used for joining all kinds of other materials like leather cloth and most other porous materials. Polyten will dry much more slowly when joining non porous materials as the setting of the adhesive is effected by evaporation or absorbtion of the water in it.

Features

Water resistant to D3 standard (BS EN 204)

Develops high bond strength.

Dries to transparent film.

Non flammable.

Suitable for Hot and Cold press.

Extended Storage Life.

Suitable for RF equipment.

Suitable for bonding wood, chipboard, block board, veneers decorative laminates and other similar materials.

Surfaces

The surfaces to be bonded must be close fitting and free from dirt, grease or any other contamination that may interfere with the adhesion.

Moisture content of timber should be 5 to 15 %

Coverage

Normal adhesive coverage is estimated to be 5 to 7 square meters per kilo. The correct spread is indicated by a slight squeeze out on the glue line edge.

The lowest spreads will give the fastest setting time.

Assembly and Pressing

Assembly should be carried out as soon as possible within the open time (approx. 5 minutes dependent on temperature and humidity). Pressing should be carried out after assembly whilst adhesive is still wet. A press time of 15 to 25 minutes is recommended at 20°C. In heated press the minimum process time can be reduced to 3 to 5 minutes at 70% Pressure should be 30 to 100 PSI.

Storage and use